Heat resistant gloves are becoming more and more widely used in many industries. It has become a  very necessary labor protection equipment in industry, which can effectively reduce the occurrence of industrial accidents and protect the safety and health of workers. High temperature resistant gloves are widely used in cement, ceramics, aluminum, power plants, petrochemical and electric welding and other high temperature working environment. The following five areas of protection products show are suitable scenarios for high temperature gloves, which can help you to have a further understanding of them.

First field : electronics and chemicals

Anti-static and heat-resistant gloves should be used in electronic and chemical industries. These two industries have their own characteristics. Generally, heat resistant gloves are required to have good anti-static performance, otherwise static electricity will easily lead to product damage, or even serious explosion. Anti-static and heat resistant gloves are usually made of aramid fiber. The surface layer is made of 99% aramid fiber and 1% conductive wire, which has good anti-static performance, wear resistance and high temperature resistance.

Second: dust-free workshop and laboratory

Dust-free and high-temperature gloves should be used in dust-free workshops and laboratories. These two fields require gloves to have high cleanliness and flexibility, so dust-free high-temperature gloves are more suitable. Its surface layer is made of coating treatment or aramid filament fiber, so the surface layer can not dust and chip, and can withstand the high temperature of 180 degrees, 300 degrees of flexibility, excellent performance.

Third: glass industry

Glass industry should choose 300-500 degree of aramid gloves resistant to high temperature. In this industry, the high temperature resistance of high temperature gloves is relatively low, and the flexibility and cutting resistance are high, so the selection of aramid high temperature gloves is more appropriate. The aramid gloves not only have good high temperature resistance and cutting resistance, but also have soft outer layer, comfortable inner layer and good flexibility.

Fourth: Photovoltaic industry

Photovoltaic industry should choose 500 degree aramid high-temperature gloves or 650 degree aramid blended high-temperature gloves. The industry has high requirements for wear resistance and sustainable working performance of high-temperature gloves, and the contact temperature is generally about 500-650 degrees. Aramid gloves are selected for their superior high temperature resistance and wear resistance. The thickening of the heat insulation layer and the wear-resisting layer on the surface can greatly increase the life of continuous use and can work sustainably. Aramid high-temperature gloves are also the most widely used high-temperature gloves in the photovoltaic industry. After a lot of use, the stability is guaranteed.